T12 焊台控制器功能介绍 T12 Quick Heating Soldering Station featuring
烙铁头温度实时监测
Temperature measurement of the tip
PID温度控制
Direct or PID control of the heater
可以通过编码器进行控制温度
Temperature control via rotary encoder
短按编码器进入短时升温模式
Boost mode by short pressing rotary encoder switch
长按编码器进入主菜单
Setup menu by long pressing rotary encoder switch
手柄震动检测（需要手柄含有震动传感器）
Handle movement detection (by checking ball switch)
手柄连接检测（通过判断烙铁头温度是否能够被读取来实现）
Iron unconnected detection (by idenfying invalid temperature readings)
定时器设定 - 随眠，关机时间
Time driven sleep/power off mode if iron is unused (movement detection)
可以测量主控芯片电压以及温度
Measurement of input voltage, Vcc and ATmega's internal temperature
在OLED上实现信息显示
Information display on OLED
支持无源蜂鸣器
Buzzer
允许设置不同烙铁头的温度校准值
Calibrating and managing different soldering tips
设置被保存在EEPROM，掉电不丢失
Storing user settings into the EEPROM
允许热插拔烙铁头，并弹出烙铁头配置选择菜单
Tip change detection
=========UI upgraded version =========
芯片过热以及低电压报警
Chip overheating and low voltage alarm
更好的实时温度条以及实时功率条
Better real-time temperature bar and real-time power bar
拥有过渡动画
Have transition animation
内置屏幕保护程序
Built in screen saver
屏幕翻转设置
Screen flip settings
内置英文、中文语言包
Built in English and Chinese language pack
开机密码设置
System Password
允许设置旋钮方向
Knob direction setting menu
内嵌看门狗，宕机自动重启
Watchdog timer automatic reset the MCU
V1.8t7 New features:
EEPROM可用性检查机制
EEPROM availability check
允许保存最大30个烙铁头的配置
Tip change detection30 preservable soldering tip configurations
9段温度曲线拟合
9 segments of temperature curve fitting
